Image

Design, analysis and optimisation publications

D.A. Bofilios, G.C. Papanicolaou and A.V. Pournaras, “Damage accumulation modelling in unidirectional polymer matrix composites,” Proceedings of the 8th European Conference on Composite Materials ECCM - 8, Naples, Italy, 3-6 June, I. Crivelli-Visconti, Editor, Woodhead Publishing Ltd, Cambridge, 1998, Vol. 1, pp. 111-118.

 

D.A. Bofilios, G.C. Papanicolaou and A.V. Pournaras, "Probabilistic Damage Accumulation Modelling in Transversely Isotropic Structures", International Journal of Composite Materials, to be published.

 

Bofilios, D.A. and van Lochem, J.H., "Heat analysis of thermoplastic components during the initial stages of manufacturing: a probabilistic approach," Proceedings of the International Symposium on Advanced Materials for Lightweight Structures, ESTEC, Noordwijk, The Netherlands, 25-27 March 1992, ESA SP-336, European Space Agency Publications Division, ESTEC, Noordwijk, 1992, pp. 179-183.


Bofilios, D.A. and van den Ende, K., "Deformation mechanisms of continuous fiber-reinforced thermoplastic composites during manufacturing: a probabilistic approach," Proceedings of the International Symposium on Advanced materials for Lightweight Structures, ESTEC, Noordwijk, The Netherlands, 25-27 March, 1992 ESA SP-336, European Space Agency Publications Division, ESTEC, Noordwijk, 1992, pp. 173-177.


G.C. Papanicolaou, A.V. Pournaras, D.A. Bofilios, J.H. van Lochem, C. Henriksen and H.H. Lund, “Residual impact strength of recycled thermoplastic composites subjected to corrosive environment,” Proceedings of the Seventh International Conference on Fibre Reinforced Composites: FRC ’98 Consolidating New Applications, Newcastle-upon-Tyne, UK, 15-17 April 1998, A.G. Gibson Editor, Woodhead Publishing Limited, Cambridge, 1998, pp. 346-354.


G.C. Papanicolaou, A.V. Pournaras, D.E. Mouzakis, J. Karger-Kocsis and D.A. Bofilios, “Probabilistic approach for residual compressive strength of CFRP laminates, following low velocity impact,” Proceedings of the Third International Conference on Progress in Durability Analysis of Composite Systems DURACOSYS ’97, 14-17 September 1997, Virginia Tech, Blacksburg, VA, USA, K.L. Reifsneider, D.A. Dillard and A.H. Cardon, Editors, Balkema Publishers, Rotterdam/Brookfield, 1998, pp. 325-330.


Kopanas, V. and Bofilios, D.A., “An expert system for the design of the resin transfer moulding process," Proceedings of the Fourth International Conference on Computer Aided Design in Composite Material Technology CADCOMP ‘94, 29 June-1 July 1994, Southampton, UK, 1994, W.R. Blain and W.P. De Wilde, Editors, Computational Mechanics Publications, Southampton, 1994.


D. Bofilios and A. Pournaras, “Introducing GQM in developing engineering software applications ESSI PIE No. 23602 - MIFOS,” Proceedings of the 4th International Conference on ACHIEVING QUALITY IN SOFTWARE - AQuIS ’98: ESSI SESSION, Venice, Italy, 30 March-2 April 1998, C. Ghezzi and M. Fusani, Editors, Published by Nuovo Studio Tecna, Roma, 1998, pp. 395-401.

 

Galiotis C. and Koimtzoglou C., “The effect of interface on the fatigue performance of fibre composites”, in Fatigue in Composites: Science and technology of the fatigue response of fibre-reinforced plastics, Ed. B. Harris, Woodhead Publishing Ltd., Cambridge, England, 147-172 (2003).

 

Koimtzoglou C., Kostopoulos V., Galiotis C., “Stress transfer efficiency in model composites under dynamic loading”, Appl. Phys. A, 76: 231-239 (2003).

Koimtzoglou C., Kostopoulos V., Galiotis C., “Micromechanics of reinforcement and damage initiation in carbon fibre/ epoxy composites under fatigue loading”, Composites, 32A: 457-471 (2001).

Koimtzoglou C., Kostopoulos C.K.V., Melanitis N.E., Paipetis S.A., “The effect of cyclic loading on the micromechanics of the interface”, ADVANCED COMPOSITES LETTERS, 4 (5): 151-155 (1995).

Anagnostopoulos G., Koimtzoglou C., Bollas D., Goutianos S., Parthenios J., Psarras G.C. and Galiotis C., “Investigation of stress transfer mechanisms in fibre reinforced composites under tension and compression”, Proc. COMP 2003 5th Intern. Symp. on Advanced Composites, Corfu, Greece, May 5-7 (2003). (Oral)

Bollas D., Koimtzoglou C., Anagnostopoulos G., Psarras G.C., Parthenios J. and Galiotis C., “A new approach for assessing the interface efficiency on standard full-composite specimens”, Proc. 10th European Conf. on Composite Materials, Brugge, Belgium, June 3-7 (2002). (Oral)

Bollas D., Psarras G.C., Parthenios J., Koimtzoglou C. and Galiotis C., “In-situ measurements of the stress transfer efficiency of full composites during mechanical loading”, Proc. IPCM 2001 Seventh Intern. Conf. On Interfacial Phenomena in Composite Materials, Arcachon, France, September 11-14 (2001). (Oral)

Koimtzoglou C., Kostopoulos V., Galiotis C., “Micromechanics of reinforcement in carbon fibre model and full composites under fatigue loading conditions”, Proc. IPCM 2001 Seventh Intern. Conf. On Interfacial Phenomena in Composite Materials, Arcachon, France, September 11-14 (2001). (Oral)

Koimtzoglou C., Goutianos S., Galiotis C., “Micromechanics of carbon fibre model composites under tensile, compressive and fatigue loading conditions”, Proc. 6th National Congress on Mechanics, pp. 401-407, Thessaloniki, Greece, July 19-21 (2001). (Oral)

Koimtzoglou C., Kostopoulos V., Galiotis C., “Stress transfer efficiency under fatigue loading in model and full composites”, Proc. HELLAS-COMP 2001 2nd National Conference On Composite Materials, pp. 337-347, Patras, Greece, June 6-9 (2001). (Oral)

Goutianos S., Stamou K., Koimtzoglou C., Galiotis C., “Measurements of mechanical stresses in composite materials using laser Raman spectroscopy”, Proc. XVI Panhellenic Conference on Solid State Physics, 146-149, Nafplio, Greece, September 17-20 (2000). (in Greek) (Oral)

C. Koimtzoglou, V. Kostopoulos, C. Galiotis, “Effect of Fatigue Loading Upon the Stress Transfer Efficiency in Carbon Fibre Composites”, Proc. ECCM 9, Composites – From Fundamentals to Exploitation, Brighton, UK, June 2000. (Poster)

C. Koimtzoglou, V. Kostopoulos, C. Galiotis, “Micromechanics of reinforcement in carbon fibre composites under fatigue loading conditions”, Handbook of extended abstracts of IPCM 6, Berlin, Germany, September 1999, pp. 7a2. (Oral)

C. Koimtzoglou, C. Galiotis, V. Kostopoulos, “Effect of fatigue loading on the stress transfer mechanism in fibre reinforced plastics”, Proc. 2nd National Congress on Chemical Engineering, Thessaloniki, Greece, May 1999, 681-684. (in Greek) (Oral)

C. Koimtzoglou, V. Kostopoulos, C. Galiotis, S.A. Paipetis, “Micromechanics of Fatigue Failure in Composites”, Proc. of the 5th National Congress on Mechanics, Ed. P.S. Theocaris, D.I. Fotiadis, C.V. Massalas, The University of Ioannina, Ioannina, Greece, August 1998, Vol. 1, pp. 141-147. (Oral)

C. Koimtzoglou, V. Kostopoulos, C. Galiotis, S.A. Paipetis, “Monitoring the Stress Transfer Characteristics in Composites Under Static & Dynamic Loading Conditions”, Proc. of the ECCM 8, Science, Technologies and Applications, Ed. I. Crivelli Visconti, Woodhead Publishing Limited, Naples, Italy, June 1998, ISBN 1 85573 409 5, pp. 281-283. (Oral)

C. Koimtzoglou, C. Galiotis, “Determination of the Stress Transfer Mechanism in Polymeric Matrix Composite Materials Using the Technique of Laser Raman Spectroscopy”, Proc. of the 4th Panhellenic Conference on Polymers, Patras, Greece, November 1997, pp. 241-245. (Oral)

C. Koimtzoglou, V. Kostopoulos, N. E. Melanitis, C. Galiotis, “Assessing the Effect of Fatigue on the Interfacial Properties of Model Composites Using the Fragmentation Test and the Technique of Laser Raman Microscopy”, Proc. of the 8th International Conference on Mechanics and Technology of Composite Materials, Sofia, Bulgaria, September 1997, pp. 259-264. (Oral)

C. Koimtzoglou, V. Kostopoulos, N. E. Melanitis, C. Galiotis, “The Effect of Fatigue on the Interfacial Properties of Model Composites: Implementation of the Fragmentation Test and the Technique of Laser Raman Microscopy. Comparative Evaluation”, Proc. of the  First Hellenic Conference on Composite Materials and Structures, Ed. S.A. Paipetis, E.E. Gdoutos, Xanthi, Greece, July 1997, ISBN 960-343-404-3, pp. 391-407. (Oral)

C. Koimtzoglou, V. Kostopoulos, N.E. Melanitis, S.A. Paipetis, “The effect of fatigue on the interfacial properties of model composites”, Proc. of COMP’95, High Technology Composites in Modern Applications, Ed. S.A. Paipetis and A.G. Youtsos, ISBN 960-85676-0-2, 1995, pp. 66-73. (Oral)

 

Michail X. Galatoulas, Dimitri A. Bofilios - Formulation of Low Discrepancy Adaptive Latin Hypercube Design of Experiments (LDA-LHD), INASCO - Integrated Aerospace Sciences Corporation, 17 Tegeas st., Argyroupolis, 16452 Athens, Greece, This e-mail address is being protected from spam bots, you need JavaScript enabled to view it - Second NACRE Workshop
 
up.png